Acton紫外——VUV/UV激光分束鏡
Acton Optics & Coatings可以根據水平“P”偏振或垂直“S”偏振等要求進行優化,為您的應用定制分光器。如果需要,可在分束器的背面涂上抗反射涂層。可在阿克頓的標準基材上使用涂料。
這些多層,介質,低吸收涂層是理想的激光輸出耦合器和束分裂應用。所有波長范圍為126至353 nm的分束器,均按指定的激光波長和入射角校正反射率和透過率,以確保在高功率激光應用中具有優異的性能。標準分束器是為隨機極化設計的。
Wavelength | 10% +/-2% | 30% +/-5% | 50% +/-5% | 70% +/-5% | 90% +/-5% |
126nm | M126-P1045 | M126-P3045 | M126-P5045 | M126-P7045 | M126-P9045 |
147nm | M147-P1045 | M147-P3045 | M147-P5045 | M147-P7045 | M147-P9045 |
157nm | M157-P1045 | M157-P3045 | M157-P5045 | M157-P7045 | M57-P9045 |
172nm | M172-P1045 | M172-P3045 | M172-P5045 | M172-P7045 | M172-P9045 |
193nm | M193-P1045 | M193-P3045 | M193-P5045 | M193-P7045 | M93-P9045 |
248nm | M248-P1045 | M248-P3045 | M248-P5045 | M248-P7045 | M248-P9045 |
266nm | M266-P1045 | M266-P3045 | M266-P5045 | M266-P7045 | M266-P9045 |
308nm | M308-P1045 | M308-P3045 | M308-P5045 | M308-P7045 | M308-P9045 |
353nm | M353-P1045 | M353-P3045 | M353-P5045 | M353-P7045 | M353-P9045 |
NOTE: Beamsplitter Coating Part Numbers (Based on % Transmission)
For Complete Beamsplitter: Coating Part # + Substrate Part # = Complete BeamsplitterFor example: To order a 308nm, 45° beamsplitter with 30% transmittance on a 1.0” flat UV grade fused silica substrate: Part # M308-P3045-1D-MBCoatings for rear surface use must be specified by adding ‘-S2’ to coating part numbers. | Part numbers listed above are for 45° angle of incidence coating only. If normal incidence coatings are required, delete the ‘45’ from the coating part number.
Ex: Part # M193-P1045 would be Part # M193-P10. Generally, laser grade UV fused silica substrates are recommended for beamsplitters above 170nm. Beamsplitter coatings can be applied to customer supplied material. |
光譜曲線
注意:可根據要求定制