當前位置:上海頤品自動化科技有限公司>>*防爆格蘭等>>英國Hawke防爆格蘭等>> Hawke防爆連接器Hawke Instrum Ex connector
參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地上海
聯系方式:張凱文查看聯系方式
更新時間:2022-12-04 21:38:10瀏覽次數:290次
聯系我時,請告知來自 儀表網Hawke防爆連接器Hawke Instrum Ex connector
Hawke防爆連接器Hawke Instrum Ex connector
上海頤品自動化,:
Tamb: -40°C to +60°C. II2 GD Exdbe IIC Extb IIIC Db T85 IP66, 67 & DTS01 deluge protected.
This revolutionary design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. The Instrum connector is available in two sizes:
The 4-way and the 9-way options will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC and 2.5A (DC1) 60V DC.
The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC and 0.5A (DC1) 60V DC.
Instrum connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables.
The InstrumEx connectors are designed to provide ease of installation and speed of use, whilst providing a flexible safe and reliable method for mating and disconnection of circuits which are energised.
The two mating halves are easily engaged and disengaged by two full turns of the ACME custom engaging thread, during which time the pins and socket are protected by the Exd flameproof protection concept. The outer shell of the connector combined with the integral Hawke cable gland seal ensure that the internal connections are protected to the Exe increased safety protection concept.
TECHNICAL DATA - 4 WAY / 9 WAY | |
---|---|
Explosion Protection | ![]() |
Ambient Temperature | -40°C to +60°C |
Certification | Baseefa 06 ATEX 0061X |
IECEx BAS06.0018X | |
Ratings 4 Way / 9 Way | Voltage AC 250V |
Current AC EN 60947-4-3 10A (AC21) | |
Current AC EN 60947-4-1 10A (AC1) | |
Current AC EN 60947-4-1 1A (AC3) | |
Frequency 50/60 Hz | |
Power Factor 0.9 | |
Voltage DC 60V | |
Current DC EN 60947-4-3 2.5A (DC21) | |
Current DC EN 60947-4-1 2.5A (DC1) | |
Current DC EN 60947-4-1 0.5A (DC3) | |
Fuse Rating 4 Way / 9 ay | 10 amp without thermal protection |
20A gL with thermal protection | |
Maximum No. of make & break operation (EN61984) | On load 150 |
Off load 500 | |
IP Rating | IP66, IP67 and DTS01 deluge protected. Note: Caps to be fitted to maintain IP ratings when the connector halves are separated |
Storage Temperature | -50°C to +70°C |
TECHNICAL DATA - 8 WAY | |
---|---|
Explosion Protection | ![]() |
Ambient Temperature | -40°C to +60°C |
Certification | Baseefa 06 ATEX 0061X |
IECEx BAS06.0018X | |
Ratings 8 Way | Voltage AC 60V |
Current AC EN 60947-4-3 1A (AC21) | |
Current AC EN 60947-4-1 1A (AC1) | |
Current AC EN 60947-4-1 0.1A (AC3) | |
Frequency 50/60 Hz | |
Power Factor 0.9 | |
Voltage DC 60V | |
Current DC EN 60947-4-3 0.5A (DC21) | |
Current DC EN 60947-4-1 0.5A (DC1) | |
Current DC EN 60947-4-1 0.1A (DC3) | |
Fuse Rating 8 Way | 0.5 amp without thermal protection |
1A gL with thermal protection | |
Maximum No. of make & break operation (EN61984) | On load 150 |
Off load 500 | |
IP Rating | IP66, IP67 and DTS01 deluge protected. Note: Caps to be fitted to maintain IP ratings when the connector halves are separated |
Storage Temperature | -50°C to +70°C |
When ordering, select the relevant code from each block as shown in the example below:
Instrum/N-BR1-M-B-P-X-0-4-X-A
Instrum![]() | Select Code | Description | Example Code |
---|---|---|---|
Material | N | Nickel Plated Brass | N |
S | Stainless Steel | ||
Connector Style | CP | Connector Plug | BR1 |
FP | Flange Mounted Connector Plug | ||
CR | Connector Receptacle | ||
FR | Flange Mounted Connector Receptacle | ||
BR1 | Bulkhead Receptacle (Fixed Position 1 Standard) | ||
BR2 | Bulkhead Receptacle (Fixed Position 2) | ||
BR3 | Bulkhead Receptacle (Fixed Position 3) | ||
BR4 | Bulkhead Receptacle (Fixed Position 4) | ||
BR5 | Bulkhead Receptacle (Fixed Position 5) | ||
Bulkhead Entry Thread | M | Metric Thread (M20 4/8-way / M32 9-way) | M |
N | NPT Thread ( ½" for 4/8-way / ¾" 9-way) | ||
R | NPT Alternative Thread ( ¾" for 4/8-way / 1" 9-way) | ||
X | N/A (for Connector Plug or Connector Receptacle) | ||
Cross Sectional Area * Bulkhead Receptacle will always be pre-terminated with 1.5mm² conductors, irrespective of cross sectional area. | A | 4 x 0.5 - 1mm² * | B |
B | 4 x 1.5 - 2.5mm² * | ||
C | 8 x 0.14 - 0.37mm² | ||
D | 9 x 0.5 - 1mm² | ||
E | 9 x 1.5 - 2.5mm² | ||
Insert Type ** Note: In all installations the "live" side of the connector must always contain the socket insert. | P | Pin Insert ** | P |
S | Socket Insert ** | ||
Outer Sheath Diameter | S | Cable Gland Seal 5.5 - 16mm (4-way/8-way) | X |
A | Cable Gland Seal 12.5 - 20.5mm (9-way) | ||
B | Cable Gland Seal 16.9 - 26mm (9-way) | ||
X | N/A (Bulkhead Receptacle) | ||
Bulkhead Receptacle Cable Length | 0 | 0.5m (standard) | 0 |
1 | 1m | ||
2 | 2m | ||
C | Customer Specified | ||
X | N/A (for Connector Plug and Receptacle) | ||
Bulkhead Receptacle Pin Quantities # Bulkheads also include an additional earth lead. | 4 | 4 (pins 1-4 terminated) Std. 4-way BR# | 4 |
3 | 3 (pins 1,2 and 3 terminated)# | ||
8 | 8 (pins 1-8 terminated) Std. 8-way BR# | ||
9 | 9 (pins 1-9 terminated) Std. 9-way BR# | ||
C | Customer Specified | ||
RJA | RJ45 Jack fitted, wired to T-568A | ||
RJB | RJ45 Jack fitted, wired to T-568B | ||
RJC | Customer Specified | ||
X | N/A (for Connector Plug and Receptacle) | ||
Armour Clamp Size ** Note: See Clamping Ring table | R | Alternative Clamping Rings B only | X |
X | N/A (Bulkhead Receptacle) | ||
S | Standard Clamping Ring O,A,B | ||
U | Unarmoured/Copper Braid Clamp (in addition to Clamping Rings) | ||
Certification | A | ATEX/IECEx/EAC/Inmetro/NEC505 | A |
Ordering Information
For ordering information and codes, please see order codes tab.
When ordering, select the relevant code from each block as shown in the example below:
Instrum/N-BR1-M-B-P-X-0-4-X-A
Instrum![]() | Select Code | Description | Example Code |
---|---|---|---|
Material | N | Nickel Plated Brass | N |
S | Stainless Steel | ||
Connector Style | CP | Connector Plug | BR1 |
FP | Flange Mounted Connector Plug | ||
CR | Connector Receptacle | ||
FR | Flange Mounted Connector Receptacle | ||
BR1 | Bulkhead Receptacle (Fixed Position 1 Standard) | ||
BR2 | Bulkhead Receptacle (Fixed Position 2) | ||
BR3 | Bulkhead Receptacle (Fixed Position 3) | ||
BR4 | Bulkhead Receptacle (Fixed Position 4) | ||
BR5 | Bulkhead Receptacle (Fixed Position 5) | ||
Bulkhead Entry Thread | M | Metric Thread (M20 4/8-way / M32 9-way) | M |
N | NPT Thread ( ½" for 4/8-way / ¾" 9-way) | ||
R | NPT Alternative Thread ( ¾" for 4/8-way / 1" 9-way) | ||
X | N/A (for Connector Plug or Connector Receptacle) | ||
Cross Sectional Area * Bulkhead Receptacle will always be pre-terminated with 1.5mm² conductors, irrespective of cross sectional area. | A | 4 x 0.5 - 1mm² * | B |
B | 4 x 1.5 - 2.5mm² * | ||
C | 8 x 0.14 - 0.37mm² | ||
D | 9 x 0.5 - 1mm² | ||
E | 9 x 1.5 - 2.5mm² | ||
Insert Type ** Note: In all installations the "live" side of the connector must always contain the socket insert. | P | Pin Insert ** | P |
S | Socket Insert ** | ||
Outer Sheath Diameter | S | Cable Gland Seal 5.5 - 16mm (4-way/8-way) | X |
A | Cable Gland Seal 12.5 - 20.5mm (9-way) | ||
B | Cable Gland Seal 16.9 - 26mm (9-way) | ||
X | N/A (Bulkhead Receptacle) | ||
Bulkhead Receptacle Cable Length | 0 | 0.5m (standard) | 0 |
1 | 1m | ||
2 | 2m | ||
C | Customer Specified | ||
X | N/A (for Connector Plug and Receptacle) | ||
Bulkhead Receptacle Pin Quantities # Bulkheads also include an additional earth lead. | 4 | 4 (pins 1-4 terminated) Std. 4-way BR# | 4 |
3 | 3 (pins 1,2 and 3 terminated)# | ||
8 | 8 (pins 1-8 terminated) Std. 8-way BR# | ||
9 | 9 (pins 1-9 terminated) Std. 9-way BR# | ||
C | Customer Specified | ||
RJA | RJ45 Jack fitted, wired to T-568A | ||
RJB | RJ45 Jack fitted, wired to T-568B | ||
RJC | Customer Specified | ||
X | N/A (for Connector Plug and Receptacle) | ||
Armour Clamp Size ** Note: See Clamping Ring table | R | Alternative Clamping Rings B only | X |
X | N/A (Bulkhead Receptacle) | ||
S | Standard Clamping Ring O,A,B | ||
U | Unarmoured/Copper Braid Clamp (in addition to Clamping Rings) | ||
Certification | A | ATEX/IECEx/EAC/Inmetro/NEC505 | A |
Ordering Information
For ordering information and codes, please see order codes tab.
中國區分銷商:
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。com
:sales@epinautomation.com
*:
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,儀表網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。