深圳市世家儀器有限公司
深圳市世家儀器有限公司
| 參 考 價 | 面議 |
產品型號P6701B
品 牌
廠商性質其他
所 在 地
聯系方式：梅志偉查看聯系方式
更新時間：2023-05-04 08:24:33瀏覽次數：85次
聯系我時，請告知來自 儀表網P6701B低帶寬光探頭
體積小、封裝方便的P6701B和P6703B光電模擬轉換器為光學脈沖形狀測量提供了精確的接口。
特性和好處
寬波長響應500 ~ 950 nm或1100 ~ 1700 nm
高帶寬直流高達1.2 GHz
高增益1v /mW
低噪聲
探頭連接到DPO7000 1和DPO/MSO70000 2系列
SONET/SDH和光纖信道參考接收機性能:
TDS500C/700C(選擇3C或4C)
P6701B -光纖通道高達1063 Mb/s
P6703B - SONET/SDH高達622 Mb/s
需要TPA-to-BNC適配器
需要TCA-to-BNC適配器
應用程序
光通信信號(SONET/SDH和光纖通道)眼模測試
產品描述
Tektronix P6700系列光電轉換(O/E)轉換器將光學信號轉換為電信號，以便使用合適的適配器(見腳注1和2)、任何其他配備TekProbe接口的Tektronix示波器或與1103 TekProbe電源一起使用時，方便地對Tektronix DPO7000和DPO/MSO70000系列示波器進行分析。P6700系列O/E轉換器在光通信系統和設備的開發、制造或服務中是理想的光源特性描述。
體積小、封裝方便的P6701B和P6703B光電模擬轉換器為光學脈沖形狀測量提供了精確的接口。這些O/E轉換器具有高增益、大動態范圍和穩定的輸出偏移量，非常適合進行眼模分析和消光測量。
P6701B / P6703B光學輸入是一個1米,62.5μ多模光纖與FC / PC連接器。使用混合光纖配套套管的標準品種，這些O/ e可以適應各種工業連接器標準。
當與Tektronix DPO7000或DPO/MSO70000以及更早的TekProbe系列示波器一起使用時，TekProbe接口提供電源、自動縮放、自動終止和正確的單元(microwatts)。
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements.
Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
High-bandwidth DC up to 1.2 GHz
High Gain 1 V/mW
Low Noise
Probe Connects to DPO7000 1 and DPO/MSO70000 2 Series
SONET/SDH and Fibre Channel Reference Receiver Performance:
TDS500C/700C (Opt. 3C or 4C)
P6701B – Fibre Channel up to 1063 Mb/s
P6703B – SONET/SDH up to 622 Mb/s
1Requires the TPA-to-BNC adapter
2Requires the TCA-to-BNC adapter
Eye Pattern Testing of Optical Communication Signals (SONET/SDH and Fibre Channel)
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/MSO70000 and earlier TekProbe-equipped Series oscilloscopes.
Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.
The standard P6701B has a nominal frequency response which follows the fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect these products to the DSA8300 Series sampling oscilloscopes.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
安捷倫Agilent U1604B手持式數字示波器
安捷倫Agilent U1604B手持式數字示波器 面議
安捷倫Agilent U1602B手持式數字示波器
安捷倫Agilent U1602B手持式數字示波器 面議
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
