深圳市世家儀器有限公司
會員1.png)
深圳市世家儀器有限公司
| 參 考 價 | 面議 |
產品型號AFG1062
品 牌
廠商性質其他
所 在 地
聯系方式：梅志偉查看聯系方式
更新時間：2023-04-30 07:29:13瀏覽次數：121次
聯系我時，請告知來自 儀表網AFG1000系列任意波形發生器提供了性價比波形生成工具。 它包括兩個雙通道型號，60MHz帶寬，10 Vp-p輸出幅度。4種運行模式、50種內置常用波形和內置200 MHz頻率計數器，滿足試驗和測試工作中的大多數波形發生需求。3.95英寸TFT LCD、快捷按鈕、USB接口和PC軟件提供了最直觀的儀器配置方式。
| 型號 | 模擬帶寬 | 模擬通道 | 輸出頻率 | 記錄長度 | 采樣率 | 垂直分辨率 |
|---|---|---|---|---|---|---|
| AFG1022 | 25 MHz | 2 | 1 uHz 到 25 MHz | 8k 點 | 125 MS/s | 14 位 |
| AFG1062 | 60 MHz | 2 | 1 uHz 至 60 MHz | 1M 點 | 300 MS/s | 14 位 |
AFG1000系列任意波形發生器提供了性價比波形生成工具。 它包括兩個雙通道型號，60MHz帶寬，10 Vp-p輸出幅度。4種運行模式、50種內置常用波形和內置200 MHz頻率計數器，滿足試驗和測試工作中的大多數波形發生需求。3.95英寸TFT LCD、快捷按鈕、USB接口和PC軟件提供了最直觀的儀器配置方式。
雙通道，25 MHz或60 MHz正弦波形，12.5 MHz或30 MHz方波
14位，125 MS/s或300 MS/s任意波形，8 k點或1 M點記錄長度
幅度1 mVp-p ~ 10 Vp-p 至50 Ω負載
連續模式、掃描模式、突發模式和調制模式(AM, FM, PM, ASK, FSK, PSK, PWM)滿足學生和其他用戶完成試驗/測試作業的大部分要求
64-MB 非易失內存，存儲任意波形
內置 6 位分辨率的 200 MHz 計數器為測量頻率/周期/脈寬/占空比提供了簡便精確的方式
標配 USB 主控/設備接口，用于擴大內存和遠程控制
利用外部 U 盤，免費 ArbExpress 使得編輯用戶自定義波形變得異常簡便
兼容 TekSmartLab™，輕松完成教學
標配 5 年保修
電氣和電子實驗
通信實驗
傳感器仿真
功能測試
1 μHz ~ 25 MHz或60 MHz正弦波形范圍，12位或1 μHz分辨率和±1 ppm漂移高穩定性時基，在頻域中提供杰出的信號保真度。由于1 mVp-p到10 Vp-p輸出幅度范圍及整個頻率范圍內14位或1 mVp-p分辨率，您不必再在輸出幅度和頻率之間進行取舍。
四種不同的運行模式，利用經濟的解決方案，覆蓋大多數應用。內置50種的標準波形和任意波形，使用方便。 高達1 M點任意波形內存，用戶可以復現使用泰克示波器捕獲的或使用 ArbExpress定義的真實世界信號。 內置200 MHz和6位分辨率頻率計數器為測量頻率/周期/脈寬/占空比提供了簡便精確的方式。
高清3.95英寸彩色TFT顯示器用文本格式和圖形格式顯示相關設置和參數，讓用戶對其設置全面樹立信心，讓他們把重點放在手邊的任務上。前面板快捷按鈕和旋轉旋鈕可以用最少的工作和時間進入的功能和設置。內置64-MB非易失內存及U盤接口，為存儲用戶自定義波形提供無上限的空間。
The AFG1000 Series Arbitrary Function Generator provides a waveform generation tool with the best price performance ratio. It includes two models with dual channels, up to 60 MHz bandwidth and up to 10 Vp-poutput amplitude. The four run modes, 50 built-in frequently-used waveforms and the built-in 200 MHz frequency counter cover most waveform generation needs in your experiment and test jobs. The 3.95-inch TFT LCD, short-cut buttons, USB interface and PC software provide the most intuitive ways to configure the instrument.
Dual-channel, 25 MHz or 60 MHz sine waveforms, 12.5 MHz or 30 MHz square waveforms
14 bits, 125 MS/s or 300 MS/s arbitrary waveforms with 8 k points or 1 M points record length
Amplitude 1 mVp-p to 10 Vp-p into 50 Ω loads
Continuous, sweeping, burst, and modulation modes (AM, FM, PM, ASK, FSK, PSK, PWM) covers most requirements for students and other users to get the experiments/test job done
64-MByte internal non-volatile memory for arbitrary waveform storage
Built-in 200 MHz counter with 6-digit resolution offers an easy and precise way of frequency/period/pulse width/duty cycle measurement
Standard USB host/device for memory expansion and remote control
Free ArbExpress makes user defined waveforms editing extremely easy through an external USB memory stick
Compatible with TekSmartLab™ for easy teaching and learning
Standard 5-year warranty
Electric and electronics experiments
Communications experiments
Sensor simulation
Functional test
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Number of channels
2
Built-in waveforms
Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms
Sine waves
?Range
| AFG1022 | AFG1062 |
|---|---|
| 1 μHz to 25 MHz | 1 μHz to 60 MHz |
Sine wave in burst mode
| 2 mHz to 25 MHz | 2 mHz to 30 MHz |
Effective maximum frequency out
| 25 MHz | 60 MHz |
Amplitude flatness (1 Vp-p), typical
<10 MHz
| ±0.4 dB | ±0.5 dB |
≥10 MHz and ≤25 MHz
| ±0.7 dB |
≥10 MHz and ≤60 MHz
| ±0.9 dB |
Harmonic distortion (1 Vp-p)
≤10 MHz
| < -50 dBc | < -60 dBc |
>10 MHz
| < -50 dBc | < -47 dBc |
Total harmonic distortion
| < 0.2% (10 Hz to 20 kHz, 1 Vp-p) |
Spurious (1 Vp-p), typical
| < -45 dBc |
Phase noise, typical
| 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p |
Residual clock noise, typical
| -57 dBm |
Square wave
?Range
| AFG1022 | AFG1062 |
|---|---|
| 1 μHz to 12.5 MHz | 1 μHz to 30 MHz |
Rise/fall time, typical
| <12 ns | <10 ns |
Jitter (rms), typical
| <1 ns | <500 ps |
Overshoot
| <5% |
Ramp wave
?Range
| AFG1022 | AFG1062 |
|---|---|
| 1 μHz to 1 MHz | 1 μHz to 2 MHz |
Linearity, typical
| ≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry |
Symmetry
| 0.0% to 100.0% |
Pulse wave
?Range
| AFG1022 | AFG1062 |
|---|---|
| 1 μHz to 12.5 MHz | 1 μHz to 30 MHz |
Pulse width range
| 40 ns to 999 ks | 17 ns to 999 ks |
Pulse width resolution
| 1 ns or 4 digits |
Pulse duty
| <1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply) | |
| ≥1 MHz, 50% fixed | ≥1 MHz, 50% fixed |
Edge transition time, typical
| <12 ns, fixed | <10 ns, fixed |
Overshoot, typical
| <5% |
Jitter (rms), typical
| <1 ns | <500 ps |
Noise
?Noise bandwidth (-3 dB)
| AFG1022 | AFG1062 |
|---|---|
| 25 MHz | 50 MHz |
Noise type
| White Gausian |
DC
?Range
| AFG1022 | AFG1062 |
|---|---|
| -5 V to +5 V, 50 Ω load | |
| -10 V to + 10 V, open circuit or high Z load | |
Arbitrary waveform
?Range
| AFG1022 | AFG1062 |
|---|---|
| 1 μHz to 10 MHz | 1 μHz to 30 MHz |
Arbitrary waveform in burst mode
| 2 mHz to 10 MHz | 2 mHz to 30 MHz |
Effective analog bandwidth (-3 dB)
| 30 MHz | 60 MHz |
Non-volatile memory
| 64 MByte |
Memory
Length
| 2 to 8,192 | 2 to 1 M-point |
Sampling rate
| 125 MS/s | 300 MS/s |
Vertical resolution
| 14 bits |
Rise and fall time
| < 10 ns | < 8 ns |
Jitter (rms), typical
| < 6 ns |
Frequency
?Resolution
| AFG1022 | AFG1062 |
|---|---|
| 1 μHz or 12 digits | |
Internal reference stability
| ±1 ppm at 0 - 40 °C |
Internal reference aging
| ±1 ppm per year |
Amplitude
Range (50 Ω load)
? ≤25 MHz
| AFG1022 | AFG1062 |
|---|---|
| 1 mVp-p to 10 Vp-p | 1 mVp-p to 10 Vp-p |
>25 MHz
| - | 1 mV p-p to 5 V p-p |
?Range (Open circuit or high Z load)
≤25 MHz
| 2 mVp-p to 20 Vp-p | 2 mV p-p to 20 V p-p |
>25 MHz
| - | 2 mV p-p to 10 V p-p |
Accuracy
±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset)
Resolution
1 mVp-p, 1 mVrms or 4 digits
Units
Vp-p, Vrms
Output impedance
50 Ω (typical)
Local impedance setting
Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)
Isolation
No floating ground, signal ground connected to chassis ground
Signal output protection
Short-circuit tolerance, main output automatically disabled when over current
Range
±(5 Vpk– Amplitudep-p/2), 50 Ω load
±(10 Vpk– Amplitudep-p/2), open circuit or high Z load
Accuracy
±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p))
Resolution
1 mV or 4 digits
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.
The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.
Amplitude modulation
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, noise, arbitrary
Internal AM frequency
2 mHz to 20 kHz
Depth
0.0% to 100.0%
Frequency modulation
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, noise, arbitrary
Internal modulating frequency
2 mHz to 20 kHz
Frequency deviation
(limited by carrier waveform type)
| AFG1022 | AFG1062 |
|---|---|
| 2 mHz to 12.5 MHz | 2 mHz to 30 MHz |
Phase modulation
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, noise, arbitrary
Internal PM frequency
2 mHz to 20 kHz
Phase Deviation
0° to 180°
Amplitude shift keying
(AFG1062 only)
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
50% duty cycle square
ASK rate
2 mHz to 100 kHz
Frequency shift keying
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
50% duty cycle square
FSK rate
2 mHz to 100 kHz
Phase shift keying
(AFG1062 only)
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
50% duty cycle square
PSK rate
2 mHz to 100 kHz
Pulse width modulation
(AFG1062 only)
Carrier waveforms
Pulse, ≤1 MHz
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, arbitrary, except DC and noise
PWM frequency
2 mHz to 20 kHz
Deviation
0.0% to 50.0% of pulse period
Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.
The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.
Carrier waveforms
Sine, square, ramp, arbitrary (AFG1062 only)
Minimum start-stop frequency
1 μHz
Maximum start-stop frequency
?Sine
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
