江蘇春晨電纜有限公司：http://www.c-secret.cn/st82365/JBQ型橡皮絕護套引接線(JB1171-76)用途:該型號產品交流額定電壓1140v以及以下的B級絕緣電機,電器繞組連接并引出機殼或繞組與電機殼體上的接線柱連接電線JBQ電機引接線
Wire and cable inspection is the strict implementation of the national policy on the quality of products, policies and the superior quality of wire and cable technology products and related products to ensure the quality of the system. Practice has proved that the quality of wire and cable products is related to the safety of electricity, the relationship between the quality of life of the people to improve, the relationship between the reputation of the enterprise. But the yield and quality of wire and cable products is not only judged out, but in the design and production process produced by two tests to determine the quality of products. JBQ電機引接線Product quality is a comprehensive reflection of the enterprise, so to improve the quality of wire and cable products is the responsibility of all employees. To improve product quality, we must promote the comprehensive quality management, rely on the masses, to ensure product quality. Product quality inspection is not only an important part of total quality management, but also an indispensable part of the production process to ensure product quality, is an important means to ensure the quality of products. Therefore, it is necessary to continuously strengthen the quality inspection of wire and cable products.
什么叫產品質量檢驗？產品質量檢驗就是借助于某種手段或方法，測定產品質量的特性，然后把測定的結果同既定的質量標準做比較，從而對該產品做出合格或不合格的判斷。
What is the product quality inspection? Product quality inspection is by some means or methods, determination of the quality of products, and the determination results with the established quality standards for comparison, so as to make the product qualified or unqualified to judge.
檢驗總是對既定成果而言，因而也是“事后”的，所以，單純的質量檢驗也稱為事后檢驗，其主要任務是“把關”原材料不合格不進車間，半成品不合格不轉入下道工序，即根據產品質量要求，把不合格品剔除出來，不使之投入生產轉入下一工序或產品出廠。這種事后檢驗，對于防止不合格品混入生產或出廠，保證產品質量是*必要的。就我們企業目前的實際情況來看，今后必須檢查嚴格地“把關”，毫不放松。但是，光靠檢驗畢竟還是被動的，把保證產品質量的重點放在檢驗上是不能從根本上解決質量問題的。把關再嚴，也只是把廢品挑選出來，而不能解決產生廢品的原因等問題，應實行把關與積極預防相結合，以預防為主的原則，以及檢驗人員實行卡、防、幫、講的工作方法。
The results of test is always established, hence "afterwards", so called pure quality inspection after the inspection, the main task is to "check" unqualified raw materials into the workshop, semi-finished products unqualified into the next process, according to the requirements of product quality, the unqualified rejection, investment don't make the production into the next process or product factory. This post hoc test, for the prevention of substandard products mixed with the production or factory, to ensure product quality is compley necessary. On the actual situation of our enterprise at present, must check strictly "gatekeeper" in the future, we. However, after all, the test is passive, to ensure product quality focus on the test is not a fundamental solution to the quality of the problem. Checks to be strict, just picked up the waste, and can not solve the problem of waste generated reasons, should be implemented to ensure the combination and active prevention, prevention principle, implementation method, and help prevent work card and inspection personnel.
卡：即把關；防：即預防產生廢品，防患于未然；幫：及對操作人員進行技術指導，共同解決質量問題；講：即宣傳質量*的方針，就是針對單純質量檢驗的弱點提出來的。
Card: check; anti: preventing the waste generated, nip in the bud; help: and technical guidance to operators, to solve the quality problems; say: advocating the principle of quality first, quality inspection is only on the weaknesses.
