8510系列拉壓力傳感器
結構緊湊，尺寸小，安裝方便，適用于小而極小的力，機械過載停止
-
Features
- 量程范圍小，從 0 ... 20 N 到 0 ... 2 MN
- 可測拉力和壓力
- 過載保護可達到量程的5倍
- 小巧的外形設計
- 安裝方便
-
Product data
型號 8510 量程范圍 0 … 1 N
0 … 2 N
0 … 5 N
0 … 10 N
0 … 20 N受力方向 壓力和壓力 標準化信號 可選配 信號輸出 1 mV/V 保護等級 IP20 過載保護 Yes 拉盤 No 受力壓頭 No 使用溫度范圍 -20 ... +80 °C 具體特點 - 量程范圍小，從 0 ... 20 N 到 0 ... 2 MN
- 可測拉力和壓力
- 過載保護可達到量程的5倍
- 小巧的外形設計
- 安裝方便
-
Description
The model 8510 bending beam load cell is suitable for measuring small and extremely small applied forces. The mechanical overload protection available for all measuring ranges prevents the sensor from being damaged by excessively high static and quasi-static loads which can occur during measurement and installation.
The sensor can be extended axially, e.g. by a finger, which does not influence the measuring.
Essential application of this sensor include measurement and testing of the following components:
Switches (limit-, micro- and toggle-switches)
Buttons
Contact coupling and contact decoupling forces
Frictional forces
Spring characteristics
Tension of wire and string windings
The sensor element consists of a double bending beam with applied strain gauges.
Changes in the ohmic resistance of the strain gauge fullbridge caused by applied forces are converted into electrical voltages. The precise value (characteristic value) of the output voltage, resulting from the application of a rated force to the sensor, is specified in the accompanying calibration protocol.
The sensor has to be mounted by two screws on the cable side. The opposite side is meant to receive applied forces (loads).
Once the rated stress or strain is exceeded by 20 %, further deflection of the bending beam is prevented by an integrated, mechanical stop. This protects the sensor element against permanent deformation. -
Downloads
Data sheet
8510參數資料 ENOperation manual 8510使用手冊 EN
Related products
8431,8432系列
