體積小、封裝方便的P6701B和P6703B光電模擬轉換器為光學脈沖形狀測量提供了精確的接口。
特性和好處
寬波長響應500 ~ 950 nm或1100 ~ 1700 nm
高帶寬直流高達1.2 GHz
高增益1v /mW
低噪聲
探頭連接到DPO7000 1和DPO/MSO70000 2系列
SONET/SDH和光纖信道參考接收機性能:
TDS500C/700C(選擇3C或4C)
P6701B -光纖通道高達1063 Mb/s
P6703B - SONET/SDH高達622 Mb/s
需要TPA-to-BNC適配器
需要TCA-to-BNC適配器
應用程序
光通信信號(SONET/SDH和光纖通道)眼模測試
產品描述
Tektronix P6700系列光電轉換(O/E)轉換器將光學信號轉換為電信號，以便使用合適的適配器(見腳注1和2)、任何其他配備TekProbe接口的Tektronix示波器或與1103 TekProbe電源一起使用時，方便地對Tektronix DPO7000和DPO/MSO70000系列示波器進行分析。P6700系列O/E轉換器在光通信系統和設備的開發、制造或服務中是理想的光源特性描述。
體積小、封裝方便的P6701B和P6703B光電模擬轉換器為光學脈沖形狀測量提供了精確的接口。這些O/E轉換器具有高增益、大動態范圍和穩定的輸出偏移量，非常適合進行眼模分析和消光測量。
P6701B / P6703B光學輸入是一個1米,62.5μ多模光纖與FC / PC連接器。使用混合光纖配套套管的標準品種，這些O/ e可以適應各種工業連接器標準。
當與Tektronix DPO7000或DPO/MSO70000以及更早的TekProbe系列示波器一起使用時，TekProbe接口提供電源、自動縮放、自動終止和正確的單元(microwatts)。
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements.
Features and benefits
Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
High-bandwidth DC up to 1.2 GHz
High Gain 1 V/mW
Low Noise
Probe Connects to DPO7000 1 and DPO/MSO70000 2 Series
SONET/SDH and Fibre Channel Reference Receiver Performance:
TDS500C/700C (Opt. 3C or 4C)
P6701B – Fibre Channel up to 1063 Mb/s
P6703B – SONET/SDH up to 622 Mb/s
1Requires the TPA-to-BNC adapter
2Requires the TCA-to-BNC adapter
Applications
Eye Pattern Testing of Optical Communication Signals (SONET/SDH and Fibre Channel)
Product description
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/MSO70000 and earlier TekProbe-equipped Series oscilloscopes.
Performance you can count on
Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.
The standard P6701B has a nominal frequency response which follows the fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect these products to the DSA8300 Series sampling oscilloscopes.
