OM2210 相干光接收機校準源包含相干光接收機校準所需的功能和軟件。OM2210 裝備兩路獨立的自由運行激光和精密偏振開關，能夠用已知極化信號來激勵相干光接收機，從而能夠提取接收機的線性傳遞函數。
主要功能
測量相干光接收機的主要性能參數，如正交相位角、路徑增益和通道時延
獲得校準后的光場測量中使用的波長上的校準數據
校準任何足夠穩定的相干光接收機，使其能夠進行光場測量
在示波器帶寬內任意外差頻率上測量接收機混合參數
測量更高級接收機模塊中的光混合屬性
OM2210可以配置最多兩個可調諧激光器。OM2012只提供了可調諧激光光源。
主要特點
整個C頻段和/或L頻段可調諧連續波激光器
集成波長鎖定裝置，支持50 GHz ITU波長網格
可設置網格1 GHz
網格外調諧，支持自定義波長應用
用戶可調節發送功率輸出(+6到+15.5 dBm)及操作中波長調節
設計并經檢驗滿足RoHS指令
1M級激光器安全產品
IEC/UL 60950-1安全認證
應用
用于OM1106/ OM4200軟件，自動執行接收機測試(詳情請參見OM1106產品技術資料)：
校準相干接收機前端特點，用于校準后的光信號測量
集成雙偏振內差相干接收機頻域特性分析
OM2210 coherent optical receiver calibration source contains functions and software required for coherent optical receiver calibration. OM2210 is equipped with two independent free-running laser and precise polarization switch, which can excite the coherent optical receiver with known polarization signal, so as to extract the linear transfer function of the receiver.
The main function
The main performance parameters of coherent optical receiver, such as orthogonal phase Angle, path gain and channel delay, are measured
Obtain the calibration data on the wavelength used in the calibrated light field measurement
Calibrate any coherent optical receiver that is stable enough to make field measurements
The mixed parameters of the receiver are measured at any heterodyne frequency within the oscilloscope bandwidth
Measure optical mixing properties in higher receiver modules
The OM2210 can be configured with up to two tunable lasers. OM2012 only provides tunable laser light source.
The main features
The entire c-bａnd and/or l-bａnd tunable cw laser
Integrated wavelength locking device, support 50 GHz ITU wavelength grid
Grid minimum 1 GHz can be set
Net extra tuning to support custom wavelength applications
The user can adjust the transmitted power output (+6 to +15.5 dBm) and adjust the wavelength during operation
Designed and tested to meet RoHS instructions
1M level laser safety product
IEC/UL 60950-1 safety certification
application
Used for OM1106/ OM4200 software to automatically perform receiver test (for details, please refer to OM1106 product technical data) :
Calibrate the front end features of the coherent receiver for calibrated optical signal measurements
Analysis of frequency domain characteristics of integrated dual polarization intra - differential coherent receiver
