Transmitters
Unified operating concept, flexible outputs, software packages, Fieldbus interface, Ex-approvals and much more - all a matter of course for the Promag transmitters.
Promag 10
Cost-effective transmitter for basic applications
Promag 23
兩線制變送器用于降低安裝和操作成本
Promag 50 / 51
- Transmitters for all standard applications and for custody transfer
- Two-line, backlit display
- Pushbutton controls
- With extended functionality suitable for special applications
- Four-line, backlit display
- "Touch Control" operation from outside
- Measures pulsating flow
- F-Chip (software upgrade options): filling and dosing, electrode cleaning
- HistoROM / T-DAT: Data memory for device parameters
- Signal inputs for temperature or density
The robust Promag sensors have a wide range of materials, measuringtube liners and process connections (DIN, ANSI, JIS, AWWA, AS) to cover virtually any application. Accuracy: typically ±0.2...0.5% of reading.
Promag W
- Nominal diameters DN 25...2000 (1...78"), also for custody tranfer
- Polyurethane (PU) liner for cold water and slightly abrasive fluids
- Hard-rubber (HR) liner for all water applications
- Temperature ranges:
HR 0...+80 °C (+32...+176 °F),
PU -20...+50 °C (-5...+122 °F)
- For difficult fluids of all kinds (e.g. ore slurry, paper pulp or fruit mash)
- Nominal diameters: DN 15 to 600 (1/2...24")
- Industry-optimized measuring electrodes and linings for process temperatures up to +180 °C (+356 °F)
- Nominal diameters DN 15...600 (1/2...24"), also for custody transfer
- PTFE and PFA liners for all applications in the chemical and process industry (PFA is specially for high process temperatures / severe temperature shocks,
-40...+180 °C / -40...+355 °F)
- For very low flow rates,
DN 2...100 (1/12...4"), robust stainless-steel housing - PFA liner for all applications in the chemical, process and food industry (for high process temperatures / severe temperature shocks,
-20...+150 °C / -5...+302 °F) - CIP/SIP (3-A approval, EHEDG-tested, conform to FDA, USP Class VI)
- Flexible process-connection concept
Magphant
- 一體化型流量監(jiān)控儀適用于所有應用場合
- 插入式傳感器
- 鋼質管道或塑料管道的低成本監(jiān)測，管道尺寸 DN 15 ... 2000 (1/2 ... 80")
Dosimag
- 灌裝應用場合中使用的流量計
- 特別緊湊的設計
- 高可重復性
- DN 4 ... 15 [5/32" ... 1/2"]
- 流量測量可達1.66 l/s
- 流體溫度可達 +130 °C
- 過程壓力可達16 bar
- CIP/SIP 清洗
- 不銹鋼外殼
- 食品行業(yè)和衛(wèi)生領域認證: 3A 認證, EHEDG測試,符合FDA認證要求
- 專用測量管內襯材料: PFA
