ISOSCOPE FMP10渦流涂層測厚儀
The rugged ISOSCOPE® FMP series uses the eddy current method according to DIN EN ISO 2360, ASTM B244. It measures:
- Paint, lacquer or plastic coatings on non-ferromagnetic metal substrate materials; used for anodic coatings on aluminum
- as well as electrically anodic coatings on aluminum and electrically conducting coatings on non conducting carrier materials.
- A special application is the measurement of thin chromium coatings on copper.
For further product information, please click on the header of the relevant product within the technical spreadsheet below.
The ISOSCOPE® FMP30 as a part of the new FMP30-40 series is even more versatile than the standard models. These instruments integrate additional features such as more memory for up to 100 applications as well as extensive statistical and graphical evaluations. Tolerance limits can be entered into the calibratable applications and the production process can be analyzed statistically. The default mode can be switched to matrix mode for connected multipoint measurements. These are only a few of the many features described below.
| ISOSCOPE FMP30 | ISOSCOPE FMP10 | ISOSCOPE MP0 USB | |
| Probes | plug-in type | plug-in type | integrated |
| Applications | 100 | 1 | 1 |
| Statistics | Extensive evaluation, e.g. process tolerance limits and graphical evaluation | Common values, e.g. mean value and standard deviation | Common values, e.g. mean value and standard deviation |
Characteristic Features of the ISOSCOPE® FMP30:For all eddy current probes
Features additional to those of the basic series:
- Memory for up to 20,000 readings
- Up to 100 calibratable applications
- Capability of allocating readings into up to 4,000 Blocks
- Date and time stamp for blocks
- Statistics display of common characteristic values in the block and final results. Output of characteristic variance-analytical values
- Graphical measurement display as a histogram with a Gaussian plot
- Capability of entering process tolerance limits and computation of the associated process capability indices cp and cpk
- Audible and visual warning when tolerance limits are exceeded
- Free-running display with additional presentation of the reading as an analog bar between the tolerance limits
- External key-triggered measurement acquisition, e.g., in hollow cylinders with small diameters
- Capability to enable matrix measurement mode for connected multi-point measurements
- Capability of averaging measurement data: Only the mean value of several readings will be stored
- Measurement acquisition through area measurement possible: Only the single readings until probe lift-off are captured and averaged
- Capability to measure continuously with the probe placed on the specimen
- Outlier rejection for the automatic elimination of erroneous measurements
- Correction of any stored reading
- Application linking mode: Ability for common normalization/calibration of applications
- Designations for applications through the optional PC program MP-Name
- USB port to a printer
- Battery and line power operation
ISOSCOPE FMP10渦流涂層測厚儀經(jīng)典配置：ISOSCOPE FMP10主機+FTA-3.3H
DELTASCOPE FMP10 為磁性涂層測厚儀，訂貨號：604-301
ISOSCOPE FMP10為渦流涂層測厚儀，訂貨號：604-298
DUALSCOPE FMP20為磁性/渦流涂層測厚儀，訂貨號：604-285
DELTASCOPE FMP30為磁性涂層測厚儀，訂貨號：604-297
ISOSCOPE FMP30為渦流涂層測厚儀，訂貨號：604-299
DUALSCOPE FMP40為磁性/渦流雙功能涂層測厚儀，訂貨號：604-286
常用磁性非磁性雙功能探頭：FD10，訂貨號：604-143，測量范圍：磁性：0-1300 μm，渦流，0-800 μm
常用渦流探頭：FTA3.3H，訂貨號：604-142，測量范圍：0 - 1200 μm
常用磁性探頭：FGAB1.3，訂貨號：604-141，測量范圍：0 - 2000 μm
