SC25F橫河PH/ORP傳感器
In today’s market analytical measurements are moving from classical analogue measurement towards the use of digital smart measuring solutions. This tendency is initiated by evolving demａnd for solutions supporting increased diagnostics. Among these analytical measurements also the measurement of pH, an important control parameter in a variety of application is, following the trend resulting in the development of intelligent smart pH sensors at Yokogawa. The smart sensors developed in Yokogawa Process Analysers are the heart of the complete SENCOM®-platform.
The SENCOM® platform is build up around Yokogawa’s FLEXA21 transmitter. By insertion of the so called SENCOM® module, the SPS24 software package and suitable SENCOM® sensors the digital features become available for customers’ convenience. Yokogawa’s SENCOM® technology allows sensors to transmit and receive data when connected to Yokogawa’s FLEXA21 transmitter or to any PC with the SPS24 software installed. Sensor specific characteristics such as calibration data and other parameters are stored directly in the sensor, making configuration and setup simple and straightforward.
SENCOM® features and benefits:
• Reduced maintenance time
• Off-line calibration minimizing process impact
• Easier asset management
• Improved statistical process control
• Monitoring extreme usage conditions
• Increased data transfer distance (upto 60 mtr.)
In this specification document we will only focus on the available sensors, FU20F, FU24F, SC25F, which are part of a complete measuring loop. For the specifications of the SENCOM® module and the SPS24 software supporting the platform, refer to the applicable GS sheet available through our internet page.
• Off-line calibration minimizing process impact
• Easier asset management
• Improved statistical process control
• Monitoring extreme usage conditions
• Increased data transfer distance (upto 60 mtr.)
In this specification document we will only focus on the available sensors, FU20F, FU24F, SC25F, which are part of a complete measuring loop. For the specifications of the SENCOM® module and the SPS24 software supporting the platform, refer to the applicable GS sheet available through our internet page.
