杜邦沖擊測試儀
DUPON IMPACT TESTER
塑膠杜邦沖擊試驗機用途介紹:將試件涂面朝上,置于試驗撞擊處上,經一定高度將重錘落下,經撞擊后檢查損傷及變形情形。用于塑膠沖擊測試及涂料附著力測試。
Put the coated specimen under the impact site; check the damage and or warp of it after hit by the hammer from specified height.
塑膠杜邦沖擊測試儀標準依據 Produce Spec：JIS-K5400,K5640,ASTM-D2794
各項參數Instruction：
涂料杜邦沖擊試驗機適用材料 Applicable Materials :
涂料試片for paint ;/塑料試片 for plastics
落下高度（選擇） Falling Height（optional）:
50~500mm，間隔50mm at every 50mm;
50~1000mm ,間隔50mmat every 50 mm
重錘 falling weight:300,500,1000 (g);
1 000,2000 (g)
涂料杜邦沖擊試驗儀撞錐半徑 radius of impact head 1/2,1/4,3/16,1/8,1/16 in;
7.9mm R(5/16” R)
試件座半徑radius of Recite block:平面plain,1/4,3/16,1/8,1/16 in;/8.1mmR,15mmR
杜邦沖擊測試儀體積 Dimension(W*D*H):58*30*82cm;/58*45*128cm
重量 Weight:約45kg;/約 60kg
塑膠杜邦沖擊試驗機用途介紹:將試件涂面朝上,置于試驗撞擊處上,經一定高度將重錘落下,經撞擊后檢查損傷及變形情形。用于塑膠沖擊測試及涂料附著力測試。
Put the coated specimen under the impact site; check the damage and or warp of it after hit by the hammer from specified height.
塑膠杜邦沖擊測試儀標準依據 Produce Spec：JIS-K5400,K5640,ASTM-D2794
各項參數Instruction：
涂料杜邦沖擊試驗機適用材料 Applicable Materials :
涂料試片for paint ;/塑料試片 for plastics
落下高度（選擇） Falling Height（optional）:
50~500mm，間隔50mm at every 50mm;
50~1000mm ,間隔50mmat every 50 mm
重錘 falling weight:300,500,1000 (g);
1 000,2000 (g)
涂料杜邦沖擊試驗儀撞錐半徑 radius of impact head 1/2,1/4,3/16,1/8,1/16 in;
7.9mm R(5/16” R)
試件座半徑radius of Recite block:平面plain,1/4,3/16,1/8,1/16 in;/8.1mmR,15mmR
杜邦沖擊測試儀體積 Dimension(W*D*H):58*30*82cm;/58*45*128cm
重量 Weight:約45kg;/約 60kg
